Projet Première T12
- by willy loire
- 2017-06-09 15:23:48
- 8413 / FR
- Building Type : Factories
- Construction Year : 2016
- Delivery year : 2016
- Address 1 - street : 7 rue Ferdinand de Lesseps, ZAC de Mercières 60205 COMPIèGNE, France
- Climate zone : [Cfc] Marine Cool Winter & summer- Mild with no dry season.
- Net Floor Area : 3 300 m2
- Construction/refurbishment cost : 5 000 000 €
- Cost/m2 : 1515.15 €/m2
Primary energy need :
(Calculation method : RT 2012 )
Construction of a building with a surface area of 3300m2, workshop T12, located on a plot located on the production site of Compiègne already owned by the Owner CHANEL Parfums Beauté. The operation is part of the "Première" global project, a flagship industrial project at the Compiègne site to cope with the growth of the perfume and beauty products production business while presenting a strong human dimension.
The new T12 workshop, the 12th extension of the site since its construction in 1980, allows the production capacities of the Perfumes division to be increased. It will be used for the packaging of alcoholic perfumery products.
This extension is the first French industrial building to have obtained the HQE Exceptionnel certification.
Sustainable development approach of the project ownerExistence of a comprehensive voluntary CSR policy since 2003, in which the operation takes place. The HQE certification of the operation derives from the roadmap of the "Première" global project as a participatory project for the global transformation of the industrial site with all stakeholders. The audit confirmed a very effective teamwork around the project management, with a mastery of the project, delays and remarkable performances. Establishment of an internal communication tool under the responsibility of a communication committee, including awareness of HQE and the environment, extended to companions and service providers. The waste from the construction site reached 96% recovery, with on-site sorting (6 different buckets). The monitoring of the site's consumption (water and electricity) has been updated and posted on a weekly basis to raise staff awareness. The maintenance log was carried out on a common framework with the assistance of the MOA's operating specialist to homogenize the documents of the companies and facilitate its use in operational phase. A working group was set up to ensure the transfer of the building to the operator. The companies have drawn up a list of "made in France" products lot by lot, including the identification of processing sites in France for the extended GO.
Architectural descriptionThe building has a compact architecture. The building is protected from the prevailing cold winds, with winds between the ESE and ONO exhibitions.
Willy Loire - 03 44 30 15 00http://www.chanel.com
Assistance to the Contracting Authority
Type of market
Table 'c21_spain.rex_market_type' doesn't exist
- 72,00 kWhep/m2.an
- 140,00 kWhep/m2.an
Real final energy consumption
The total energy gain between the base model and the project model is 232.4 kWhEP / (m².an), ie 17.59%
- 3 355,00 m2
- 98,00 %
- 4 200 000,00
09 70 81 81 70http://www.thermor.fr/
Table 'c21_spain.innov_category' doesn't exist SELECT one.innov_category AS current,two.innov_category AS parentFROM innov_category AS oneINNER JOIN innov_category AS two ON one.parent_id = two.idWHERE one.state=1AND one.id = '18'
The Aéromax thermodynamic water heater is equipped with ACI Hybrid technology: dynamic anti-corrosion protection. The purpose of this protection is to maintain a protective barrier and to protect the tank against water aggressions, in particular scale and corrosion.
In addition to the ACI hybrid, it is equipped with a resistance protected by a sheath which also allows to limit the deposits in the bottom of the tank to ensure the durability of your thermodynamic water heater.
A thermodynamic water heater is an environmentally friendly water heater with an integrated heat pump. He will draw the calories naturally present in the air, a source of free and inexhaustible energy, to transmit the heat to the water of the hot water balloon. It runs all year round regardless of the seasons and allows you to divide by 4 its hot water bill.
The Thermodynamic balloon Aeromax is very easy to use. Choose the mode that suits your needs:
AUTO mode: the water heater analyzes the consumption on the previous days to adapt the hot water production according to your needs. He reacts to unforeseen events to ensure hot water by raising calls during the day.
MANUAL mode: the water heater favors operation even more with the heat pump.
In case of absence you will be able to program your thermodynamic balloon the number of days of which you are absent to avoid to heat the water unnecessarily.
New: by downloading the Cozytouch application you can remotely control your Thermodynamic water heater and visualize your energy consumption.
(Subject to being equipped with a Cozytouch bridge)
- 234,00 m3
- 0,33 m3
Indoor Air quality
Author of the page
Other case studies
House HQ1- Sant Cugat del Vâlles
- Oliver Style
Learnlife Eco Hub: pop-up learning space
- Oliver Style
I+D+I SORIA CAMPUS
- María Jesús González Díaz
- eladio rodriguez
Passive House for the Elderly
- José Miguel Asencio Asencio