Project F.

  • Projekttyp : Neubau
  • Gebäudetyp : Einfamilenhaus oder Doppelhaushälfte
  • Baujahr : 2016
  • Übergabejahr : 2017
  • Klimazone : [Cfb] Marine Mild Winter, warm summer, no dry season.
  • Nettogrundfläche : 96 m2
  • Bau / Renovierungskosten : 136 000 €
  • Funktionelle Einheit : 1 Wohnungen
  • Kosten/m² : 1 417 €/m2
  • Kosten/Wohnungen : 136 000 €/Wohnungen


Moderiert von : C21 France La redaction

  • Erschienen 16 May 18
    von Olivier Davids|Belgique
    Viewed 2368 time(s)


  • Contest

    Green Solutions Awards 2018 - Bâtiments

    Energie & Climats Tempérés
    Coup de Cœur des Internautes


    The project is designed on the passive standard. The contemporary intention is frank and simple. To optimize the compactness of the project, a car-port with a green roof is laid out in front. It is part of a dense urban fabric, well served by services, local shops and transport offer. The use of sustainable materials was emphasized : laminated timber structure, use of durable insulation (cellulose wadding, cork, fibreboard), cellulose floor and lining plates, lack of wall finishing and interior ceilings (spruce wood left exposed), untreated wood flooring, use of environmentally friendly paints, FPO roofing deck membrane. Simplification of the technical installations : absence of heating system except the presence of a heating battery on the MVC, complete home automation. Installation of photovoltaic electricity production of 3.75 kWp, covering the totality of the annual energy needs for the heating (1.371 kWh / year), domestic hot water production (1,457 kWh / year) as well as a portion of domestic electricity consumption; the project can thus be described as energetically positive in the annual balance sheet (excluding domestic electricity consumption). Gross building data: Annual heating requirement according to PHPP: 14 kWh / m²a (15 kWh / m²a max.) Annual requirement in primary energy according to PHPP: 75.8 kWh / m²a (120 kWh / m²a max.) Frequency of overheating according to PHPP: 5.3% (10% max). Results of the airtightness test before finalization: n50: 0,19 1 / h (0,6 1 / h max.) According to EN 13829, method A Results of the final air tightness test: 0 , 3 1 / h (max. 0.6 l / h) according to EN 13829, method A


    Zertifizierungssystem


    Ort

    , 4041 Vottem Belgique

    Technische merkmale