MECO – Mouvement Écologique Centre
Last modified by the author on 10/09/2015 - 12:21
New Construction
- Building Type : Office building < 28m
- Construction Year : 2011
- Delivery year : 2014
- Address 1 - street : 6, rue Vauban L-2663 LUXEMBOURG- PFAFFENTHAL, Luxembourg
- Climate zone : [Cfb] Marine Mild Winter, warm summer, no dry season.
- Net Floor Area : 1 070 m2
- Construction/refurbishment cost : 5 251 245 €
- Number of Work station : 31 Work station
- Cost/m2 : 4907.71 €/m2
-
Primary energy need
116.4 kWhep/m2.an
(Calculation method : Other )
This is a new building which is home to the Mouvement Écologique Centre (Ecological Movement), known as MECO. In terms of layout, the building houses the centre's offices, along with the associated facilities (administrative offices, meeting room, archives, brasserie). The first floor is for the general public, with a library and open spaces for the public. For this building, it was decided to create a showcase building, complying with the required ecological and energy values in relation to the environment and in terms of sustainability. The building is almost entirely made from solid timber, both the structural parts and the cladding. The use of reinforced concrete has been limited to the areas where it is strictly necessary. The result is a simple building with a number of open and flexible floor areas.
Data reliability
3rd part certified
Stakeholders
Other consultancy agency
T6-Ney & Partners s.à.r.l
http://www.ney.be/fr/contact.htmlCivil engineer
Designer
Steinmetzemeyer architectes et urbanistes
http://www.steinmetzdemeyer.com/Architect
Certification company
Hubert Schmitz
http://www.hubert-schmitz.lu/Conducting the blower-door test
Other consultancy agency
Jean Schmit Engineering s.à.r.l.
http://www.jse.lu/Technical engineering
Others
HBH S.A
http://hbh.lu/Coordinator-Leader
Owner approach of sustainability
For the Mouvement Écologique Centre the City of Luxembourg, as the client, wanted this building to be based on the passive building model, with aim of becoming a showcase for the solutions devised in response to sustainable development issues. As a result, the new building has been constructed in accordance with ecological principles and it fulfils the criteria of a passive building, with very good thermal insulation across the whole of the building's outer shell, with optimisation of the windows and doors in the outer walls, efficient sun shades, the ability to absorb internal heat energy, ventilation heating and potentially a heat pump to generate heat.
Architectural description
As the old building had serious issues with stability, damp and available floor space, the decision was taken to demolish it and erect a new building in its place. The proposed building, MECO, was to be built using materials that are healthy, innovative and environmentally friendly both today and in the future and which reduce the consumption of resources. It had to convey an ecological message whilst also ensuring its quality in terms of architecture and energy efficiency.
Building users opinion
"The resultant use of materials which fulfilled the ecological and health criteria unquestionably represents a benchmark. The overall mood inside created by, amongst other things, the generous use of natural light, wood and glass walls and the choice of paint gives a feeling of well-being. The windows overlooking the remains of the fortress and the old town as well as the terrace alongside the Alzette river form part of the building's genius loci." B.W.
Energy consumption
- 116,40 kWhep/m2.an
- 120,00 kWhep/m2.an
- 60,30 kWhef/m2.an
Envelope performance
- 0,22 W.m-2.K-1
- 0,59
Systems
- Condensing gas boiler
- Solar Thermal
- No cooling system
- Natural ventilation
- Nocturnal ventilation
- Double flow heat exchanger
- Solar Thermal
Smart Building
GHG emissions
- 28,00 KgCO2/m2/an
Life Cycle Analysis
Comfort
Product
PCM Panels
RIGIPS
http://www.rigips.ch/home.aspFinishing work / Indoor facilities
In order to increase the building's thermal inertia, the walls and ceilings are made of plasterboards which contain "Phase-Changing Materials", PCMs. These materials are capable of storing thermal energy in large quantities and retaining it for a long time with small losses. This is made possible by the change in the thermal state from solid to liquid of a high-quality paraffin: when it melts after reaching a given temperature, it stores the heat energy which is given off (fusion heat) and returns it later when it solidifies. This phase change can be repeated as often as necessary.
This product has been well received by the various parties. Its thermal inertia properties are interesting and have provoked some positive feedback from the various different stakeholders.
Lignatur box floor
Lignatur
http://www.lignatur.ch/fr/home/Structural work / Structure - Masonry - Facade
This type of box design fulfils some of the vital load-bearing structural criteria and fire resistance and also has a very positive environmental impact. These box elements also house some of the technical facilities and, lower down, sound-absorbing surfaces. These have been chosen over other products because of the very small amount of glue used in the manufacture of these elements.
Leaving these boxes visible gives a warm feeling to the rooms which increases comfort for the users.
Blown cellulose insulation
ISOCELL
http://www.isocell.com/frFinishing work / Partitions, insulation
The external walls are made of a traditional wooden structure and blown paper cellulose insulation. The benefit of the blown cellulose insulation lies in the way it fills all of the voids, leaving no gaps and thereby ensuring optimum efficiency. This material is entirely natural and has a very good thermal conductivity coefficient which is highly sought-after for its energy-efficiency qualities.
Good reception in view of its energy performance and its natural source.
Urban environment
The project is located in the Pfaffenthal district, at the bottom of the valley in Luxembourg City. MECO is part of a wider urban development project which has been in development since 2002 (construction general plan, district development plan, master plan and specific development plan). The urban general plan recommended increasing the building density, renovation of the school and even the reworking of the public spaces. The aim of the project was to restore the urban fabric which had been significantly damaged by demolitions and new buildings between the 1950s and 1970s by improving, amongst other things, the green aspect of the district, giving it a new eco-friendly dimension. The overall project has used techniques and materials which play an important role in the eco-friendly and energy-efficient future of the district and the city. In addition, it incorporates new planted areas and establishes new public outdoor spaces. In fact, new areas have been created. The external layout of the project can be divided into three parts: the passage, the extension of Boulevard de l'Alzette towards Parc Odendahl and all of the public areas of the school and MECO with the entrance to the school, the schoolyard with a playground and MECO's terrace and a small garden for the flat.
Green space
571,00
Parking spaces
The urban development meets growing requirements and demand for mobility, providing the inhabitants and users with an underground car park for 25 vehicles as well as 7 outdoor parking spaces and a partially covered bike garage.
Building Environmental Quality
- Building flexibility
- indoor air quality and health
- energy efficiency
- integration in the land
- products and materials
Reasons for participating in the competition(s)
- Bâtiment énergie zéro :
Même s’il n’est pas tout à fait zéro énergie, le MECO présente beaucoup de similitudes et est pour le moins entièrement passif. Ses performances énergétiques sont très élevées, et sa consommation si faible qu’une étude considérant l’installation de systèmes de production à partir de sources renouvelables pour fournir la faible consommation d’énergie nécessaire avait mené à la conclusion que cela n’en valait pas la peine.
Des capteurs solaires ont été installés pour assurer le réchauffement de l’eau chaude de la cuisine et la restauration et, en cas d’excédant, pour le chauffage du bâtiment. En effet, dans ce projet, les locaux ne disposent de radiateurs pour le chauffage. Toutefois,si nécessaire, un chauffage d’appointpeut réchauffer l’air du bâtiment.
Des panneaux à PMC ont été installés pour améliorer la masse thermique du bâtiment, ce sont des panneaux qui s’autorégulent, c'est-à-dire qu’ils changentde phases en fonction des variations de température. Ce qui a pour effet de maintenir la température de l’air dans les bureaux à une valeur presque constante.
Au niveau du principe énergétique,le but principal est d’éviter les déperditions de chaleur en hiver et le suréchauffement en été. Quatre critères principaux ont été mis en place : Isolation thermique des parties impactes telle que U est inférieur à 0,15 W/m2 •K ; Pas de ponts thermiques ;Construction étanche à l’air pour éviter les pertes de chaleur incontrôlables dues à des fuites d’air ; Fenêtres construites et mises en place selon les critères très strictes des maisons passives.
- Smart building :
Dans le bâtiment plusieurs technologies ont été installées de manière à pouvoir gérer les différentes techniques du bâtiment (apports solaires, ventilation,éclairage) permettant ainsi d’offrir un certain confort aux utilisateurs mais surtout de gérer le besoin énergétique et la consommation du bâtiment.
Ainsi en été, l’apport de chaleur solaire peut être géré avec un système de protections solaires commandées automatiquement. Ceux-ci descendent ouremontent en fonction de l’ensoleillement, de la température intérieure et extérieure, ainsi que de la vitesse du vent. Ils ont des programmes différentsselon les périodes de l’année.
Le bâtiment ayant une certaine inertie, les parois de celui-ci garde la chaleur emmagasinée tout au long de la journée. En réponse à cela, toutes lesfenêtres disposant d’un ouvrant sont motorisées et permettent d’assurer un système de refroidissement nocturne du bâtiment. Ce système est lui aussicommandé automatiquement. La ventilation de tous les plateaux assure un renouvellement de l’air contrôlé et gérée automatiquement. Au niveau del’éclairage des commandes désactivent automatiquement l’éclairage dans les zones non occupées. L’ascenseur dispose d’un « cut off mode », coupuretotale pour les nuits et weekends.
Il est toutefois important de noter que le bâtiment veille à laissé une certaine liberté aux utilisateurs. En effet, aujourd’hui nous sommes habitués à vivredans des locaux où tout est contrôlé automatiquement. A l’égard du confort thermique on habite pour ainsi dire dans des maisons thermostatisés. Dans lebâtiment du Méco, occupé par peu de personnes, certaines fonctions peuvent être gérées par les occupants d’un local.
- Confort et santé :
Concernant le confort et la santé, on peut dire que dès la conception du bâtiment, ces considérations ont été prises en compte. La volonté de concevoir un bâtiment exemplaire, de recourir à des matériaux performants, pour la plupart naturels et respectueux de l’environnement, de mettre en place des systèmes qui régulent le bâtiment(ventilation, protection solaire automatisés,…) mais avant tout, la volonté de concevoir une architecture de qualité, ergonomique, sont la preuve que le bien-être des occupants a été largement considéré dans ce projet.
Du point de vue de la qualité des spatiale, une attention particulière a été portée sur l’orientation des espaces, les vues, et l’apport de lumière naturelle dans ceux-ci. En effet étant donné la situation du bâtiment en fond de vallée et avec des constructions voisines, la lumière et les échappées visuelles se voyaient parfois limitées.
Ainsi, l’agencement des fonctions dans le bâtiment suivant les orientations et ouvertures les plus favorables était un premier pas vers la meilleure efficacité dans la gestion de la lumière naturelle et de l’énergie qu’elle peut apporter. Le dimensionnement des ouvertures s’adapte aux fonctions qu’elles éclairent et aux situations de vue et de lumière. La lumière du jour est visible en toute partie de circulation ou de séjour prolongé des personnes, sans ressentir de zones sombres. Les ouvertures sont positionnées pour cadrer au mieux les paysages qu’elles laissent entrer généreusement.
De la volonté de répondre aux critères du passif, a découlé une attention particulière sur la gestion de la température à l’intérieur du bâtiment, et la qualité de l’air,notamment grâce aux vitrages, à l’inertie du bâtiment, à la ventilation, au refroidissement nocturne, aux protections solaires. Le fonctionnement de ces systèmes est automatisé ce qui laisse les occupants indépendants du fonctionnement technique du bâtiment. Leur environnement de travail est sain et confortable toute l’année.
- Matériaux bio-sourcés et recyclés :
Le nouveau bâtiment du centre du Mouvement Écologique, a été construit suivant des principes, techniques et installations qui tiennent compte et prennent en considération plusieurs facteurs relatifs à l’écologie.
Le choix de matériaux,tant pour la composition de ses parois et planchers que pour les revêtements de façades et toitures, que ce soit du point de vue structurel ou du point de vue parachèvement, chaque matériau proposé et retenu pour la réalisation du nouveau bâtiment a fait l’objet d’études et d’analyses comparatives poussées pour vérifier ses qualités écologiques, ses effets et impacts environnementaux,énergétiques et structurels.
Chaque matériau retenu présente des valeurs favorables et optimales en matière de durée de vie, de fabrication, d’origine, de qualité de transmission thermique, de mise en œuvre,de rejet de gaz à effets de serre, de consommation d’énergie grise, d’acidification,de photosmog, de dégagements de chaleur, de réutilisation, etc…