Primary energy need :
(Calculation method : RT 2012 )
The Ywood building of the "Les Docks Libres" operation is part of an overall operation. With 7 storeys, it is the highest office building in France with a CLT constructive process, a solid wood structure. The location of the projectbetween Euromed 1 and Euromed 2, makes it a real piece of city. The buiding is located at a urban intersection at the entrance of Metro National. It articulates the southern island of the operation at the crossing of existing roads. The implantation continues the facades of National Boulevard in order to create a withdrawal on a small square at the intersection with Cassin street. This square will allow to installe a public space with trees at the foot of the building. It is a unique building in a dense urban center, where wood, a living material, finds its place in contrast with the surrounding buildings.
Sustainable development approach of the project ownerThe building is built with the CLT construction method. There are many advantages to the CLT method:
- short delivery times,
- carbon footprint is reduced by 50%,
- clean construction site.
Thermal insulation is external. The gain on the Bbio coefficient is 48%. The gain on the primary energy consumptions reaches 38%. We wanted to obtain the BDM (Sustainable Mediterranean Buildings) label for the construction stage. The windows are fitted with adjustable sun breakers (except on the northern facade). The roof of the building is widely vegetated and beehives will be set up in green spaces.
Monitoring of consumption goes well beyond regulatory requirements and a metrology system will optimize energy consumptions.
Anomalies in water consumptions can be detected.
LED lighting has been generalized oin the building with presence detection. The light is dimmed depending on daylight. The elevators are equipped with a system to recover energy. In addition, the Effinature label method was applied during the design stage. Effinature is the first label in the world to deal with the preservation and enhancement of biodiversity in the real estate sector.
Architectural descriptionBuilt with the technology of interlaced/glued solid timber panels BBS (BINDERHOLZ group), for floorings and bearing facade walls. The building consists of a glazed based, the exterior facades are covered with larch wood lath. The windows are equipped with electric turnable aluminum blades sun-breakers. The last storey stands a little in the back create a large accessible terrace. Office floors are 15.30m wide (useful surface) and can be divided into 3 lots. Particular attention was paid to the energy consumption of the building throughout the construction method and equipments to achieve a RT 2012 level -38%. The ergonomics and flexibility of use of the building were integrated well in advance of the design.
Building users opinion
"Foncière Inea was a pioneer in 2013 by positionning itself on one of the 1st major solid timber construction project with the Ywood label: L'Ensoleillée, located at the gates of Aix-en-Provence, this innovative 7000m² office building was quickly praised by users, confirming our confidence in solid timber construction, rarely used in France in spite of its great assets, especially for eco-responsibility. With this success, we have continued to invest in timber construction by acquiring Les Docks Libres. This project completes our commitment to the new metropolis of Aix-Marseille-Provence where we have assets for around € 60 million, or 14% of our patrimony."
Arline GAUJAL-Kempler, CEO of Foncière INEA.
"Moving our regional headquarters marks a new step in the commitment of Nexity in Marseille. Thanks to the involvement of all employees, we can move into the Ywood building. Living in a timber built office requires from us that we consider our workplace more responsibly, by revisiting our usual behavior. This eco-guide will be our instructions to consult without moderation. Welcome to the heart of Free Docks " - Christian DUBOIS - President Nexity Provence Promotion"
"Les Docks Libres fulfill a dual role:
- Social because of its location in a fast evolving district that deserves our investment.
- Architectural because bringing wood in an urban environment is a true biodiversity bet.
To date, Ywood built the the tallest timber office building in France in Marseille and we are very proud of this performance, achieved thanks to all the professional expertise of our partners. Living wood is the future. We believe in it!" - Stéphane Bouquet - Director Nexity Ywood.
If you had to do it again?
Improving the interface between the various stakeholders and technical service providers. Using BIM for example.
See more details about this projecthttp://polebdm.eu/
ContractorNEXITY M. Stéphane BOUQUET, Directeur Ywood
InvestorFONCIERE INEA Arline GAUJAL-KEMPLER
Thermal consultancy agencyTEP2E
Thermal consultancy agencyBG INGENIEURS CONSEIL Accompanying BDM
MATHIS Frank Mathis
Construction ManagerSEPROCI Eric Moineau
Other consultancy agencyQUALICONSULT M. Valériani Control office
Certification companyEFFINATURE Cédric PLANTAZ
Other consultancy agencyEUROPACTE Jacques TESTA SPS
- 81,50 kWhep/m2.an
- 132,00 kWhep/m2.an
Real final energy consumption
- 0,63 W.m-2.K-1
The Ywood Docks Libres offices are equipped of an energy monitoring system that goes well beyond the 5 uses of the RT2012 (French thermal regulation). The heat pump is equipped with a thermal energy metering that will allow us to reconstruct the COP (Coefficient of Performance). We will also measure the efficiency in energy recovery of the central handling air unit through the acquisition of the blowing and return air temperatures.
Internal temperature recorders will follow the behavioral component quite essential operating phase.
- 1 117,00 m2
- 63,00 %
Mr Jeremy KESMAECKER
The BBS is a multilayer panel, comprised entirely of solid timber. By crossing and gluing layers, meaning by alternating orientation of the wood longitudinally and transversely, dimensional variations and woodworking ensuing become negligible. The requirements of a modern building material are thus fully met. The BBS is also a solid timber finite element, which is both insulating, carrier and fire-proof. It also ensures good sound insulation and allows a quick boxing up of the building and has a positive effect on the well-being of users.
Constituted 99.4% of wood and 0.6% of glue, BBS is a monolithic material. It allows to design and build with ease, and all the details are solved without difficulty. Statistics and physics calculations are easily established and verifiable. No construction complexity. These panels were used at Les Docks Libres for walls, high and intermediate floors. They have a PEFC label.
Users appreciate the aesthetic appearance of solid timber panels and above all testify to the feeling of well-being it provides.
Indoor Air quality
- 2,00 KgCO2/m2/an
- 168,00 KgCO2 /m2
- 30,00 année(s)
- 346,00 KgCO2 /m2
Life Cycle Analysis
Reasons for participating in the competition(s)Voici selon moi les 5 atouts bas carbone du bâtiment qui lui ont permis l'obtention du label BBCA :
- Une performance énergétique forte permettant une réduction des impacts sur la durée de vie du bâtiment ;
- Un système constructif en panneaux de bois massif de type CLT au niveau des murs, des planchers et de la toiture sur les élévations. Le choix d'un système constructif utilisant des matériaux bio-sourcés permet ainsi un stockage carbone important sur la durée de vie de l'ouvrage.
- Une économie de matière sur les plateaux types : en effet les plafonds et certaines cloisons sont laissées brutes laissant les panneaux de bois de structure visibles. Une économie de matière et donc d"impacts carbone sont évités par l'économie de faux-plafonds et de cloisonnements.
- La phase chantier est performante en raison des délais plus courts et des consommations de ressources moindres sur ce type de chantier sec avec de nombreux éléments pré-fabriqués en usine et à assembler in situ.
- Une position stratégique pour la mobilité des utilisateurs avec de nombreux transports en communs à proximité dont un arrêt de métro au pied de l'ensemble. Le transport des utilisateurs est très impactant en moyenne sur le cycle de vie d'un bâtiment.